|
|
|
|
Section 1: Identification of the Substance or Mixture and of the Supplier
- GHS product identifier
- Other means of identification
- Recommended use of the chemical and restrictions on use
- Supplier’s details (including name, address, phone number etc.)
- Emergency phone number
|
Section 1: Identification of the Substance or Mixture and of the Supplier
a) GHS product identifier. b) Other means of identification. c) Recommended use of the chemical and restrictions on use. d) Supplier’s details (including name, address, phone number, etc.), the supplier address must be local to South Africa. e) Emergency phone number.
|
|
Section 2: Hazards Identification
- GHS classification of the substance/mixture and any national or regional information
- GHS label elements including precautionary statements. (Hazard symbols may be provided as a graphical reproduction of the symbols in black and white or the name of the symbol e.g. "flame")
- Other hazards which do not result in classification (e.g. "dust explosion hazard") or are not covered by the GHS
|
Section 2: Hazard(s) identification
a) GHS classification of the substance or mixture and any national or regional information. b) GHS label elements, including precautionary statements (hazard symbols may be provided as a graphical reproduction of the symbols in black and white or the name of the symbol e.g. flame, skull and crossbones.) c) Other hazards that do not stimulate classification (e.g. dust explosion hazard) or are not covered by the GHS.
|
|
Section 3: Composition/Information on Ingredients
Substance
- Chemical identity
- Common name, synonyms, etc.
- CAS number and other unique identifiers
- Impurities and stabilizing additives which are themselves classified and which contribute to the classification of the substance
Mixture
- Chemical identity
- Concentration or concentration ranges of all ingredients which are hazardous within the meaning of the GHS and are present above their cut-off levels
NOTE: For information on ingredients, the competent authority rules for CBI take priority over the rules for product identification.
|
Section 3: Composition and information on ingredients
Substance a) Chemical identity. b) Common name, synonyms, etc. c) CAS number, and other unique identifiers. d) Impurities and stabilizing additives which are themselves classified and which contribute to the classification of the substance. Mixture a) The chemical identity and concentration or concentration ranges of all ingredients which are hazardous in the sense of the GHS and are present above their cut-off levels. NOTE: For information on ingredients, the competent authority rules for CBI take priority over the rules for product identification.
|
|
Section 4: First-Aid Measures
- Description of necessary measures subdivided according to the different routes of exposure, i.e. inhalation, skin and eye contact and ingestion
- Most important symptoms/effects, acute and delayed
- Indication of immediate medical attention and special treatment needed if necessary
|
Section 4: First-Aid Measures
a) Description of required measures, subdivided based on the different routes of exposure, i.e. inhalation, skin and eye contact and ingestion. b) Most important symptoms or effects, acute and delayed. c) Indication of prompt medical attention and special treatment needed, if required
|
|
Section 5: Fire-Fighting Measures
- Suitable and unsuitable extinguishing media
- Specific hazards arising from the chemical (e.g. nature of any hazardous combustion products)
- Special protective equipment and precautions for fire fighters
|
Section 5: Fire-Fighting Measures
a) Suitable (and unsuitable) extinguishing media. b) Specific hazards deriving from the chemical (e.g. nature of any hazardous combustion products). c) Special protective equipment and precautions for firefighters.
|
|
Section 6: Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Environmental precautions
- Methods and materials for containment and cleaning up
|
Section 6: Accidental Release Measures
a) Personal precautions, protective equipment and emergency procedures. b) Environmental precautions. c) Methods and materials for containment and cleaning up.
|
|
Section 7: Handling and Storage
- Precautions for safe handling
- Conditions for safe storage including any incompatibilities
|
Section 7: Handling and Storage, including how the Chemical may be Safely Used
a) Precautions for safe handling. b) Conditions for safe storage, including any incompatibilities.
|
|
Section 8: Exposure Controls/Personal Protection
- Control parameters e.g. occupational exposure limits or biological limit values
- Appropriate engineering controls
- Individual protection measures, such as personal protective equipment
|
Section 8: Exposure Controls and Personal Protection
a) Control parameters e.g. occupational exposure limit values or biological limit values. b) Appropriate engineering controls. c) Individual protection measures, like personal protective equipment.
|
|
Section 9: Physical and Chemical Properties
- Physical state
- Colour
- Odour
- Melting point/freezing point
- Boiling point or Initial boiling point and boiling range
- Flammability
- Lower and upper explosion limits/flammability limit
- Flash point
- Auto-ignition temperature
- Decomposition temperature
- pH
- Kinematic viscosity
- Solubility(ies)
- Partition coefficient: n-Octanol/Water
- Vapour pressure
- Density and/or relative density
- Relative vapour density
- Particle characteristics
|
Section 9: Physical and Chemical Properties
a) Appearance (physical state, color etc.). b) Odour. c) Odour threshold. d) pH. e) Melting point or freezing point. f) Initial boiling point and boiling range. g) Flash point. h) Evaporation rate. i) Flammability (solid, gas). j) Upper or lower flammability or explosive limits. k) Vapor pressure. l) Vapor density. m) Relative density. n) Solubility(ies). o) Partition coefficient: n-octanol or water p) Auto-ignition temperature. q) Decomposition temperature. r) Viscosity.
|
|
Section 10: Stability and Reactivity
- Reactivity
- Chemical stability
- Possibility of hazardous reactions
- Conditions to avoid
- Incompatible materials
- Hazardous decomposition products
|
Section 10: Stability and Reactivity
a) Reactivity. b) Chemical stability. c) Chance of hazardous reactions. d) Conditions to avoid (e.g. static discharge, shock or vibration). e) Incompatible materials. f) Hazardous decomposition products.
|
|
Section 11: Toxicological Information
Concise but complete and comprehensible description of the various toxicological effects and available data used to identify those effects including:
- Information on the likely routes of exposure (inhalations, ingestion, skin and eye contact)
- Symptoms related to the physical, chemical and toxicological characteristics
- Delayed and immediate effects and also Chronic effects from short and long-term exposure
- Numerical measures of toxicity (such as acute toxicity estimates)
|
Section 11: Toxicological Information
Comprehensive but complete and explicit description of the different toxicological (health) effects and the available data used to identify those effects, inclusive of: a) information on the likely routes of exposure (inhalation, ingestion, skin and eye contact), b) Symptoms associated to the physical, chemical and toxicological characteristics, c) Delayed and immediate effects and also chronic effects from short- and long-term exposure, and d) Numerical measures of toxicity (such as acute toxicity estimates).
|
|
Section 12: Ecological Information
- Ecotoxicity (aquatic and terrestrial, where available)
- Persistence and degradability
- Bioaccumulative potential
- Mobility in soil
- Other adverse effects
|
Section 12: Ecological Information
a) Ecotoxicity (aquatic and terrestrial, where accessible). b) Persistence and degradability. c) Bio-accumulative potential. d) Mobility in soil. e) Other adverse effects.
|
|
Section 13: Disposal Considerations
Description of waste residues and information on their safe handling and methods of disposal, including the disposal of any contaminated packaging
|
Section 13: Disposal Considerations
a) Characterization of waste residues and information on their safe handling and methods of disposal, including the disposal of any contaminated packaging.
|
|
Section 14: Transport Information
- UN number
- UN proper shipping name
- Transport hazard class(es)
- Packing group if applicable
- Environmental hazards (e.g. marine pollutant (Yes/No))
- Transport in bulk
- Special precautions which a user needs to be aware of, or needs to comply with, in connection with transport or conveyance either within or outside their premises
|
Section 14: Transport Information
a) UN number. b) UN Proper shipping name. c) Transport hazard class(or classes). d) Packing group, if applicable. e) Environmental hazards (e.g. Marine pollutant (Yes/No)). f) Transport in bulk (based on Annex II of MARPOL 73/78 and the Intermediate bulk container (IBC) Code). g) Special precautions which a user needs to be aware of or needs to comply with in connection with transport or conveyance either within or outside their premises.
|
|
Section 15: Regulatory Information
Safety, health and environmental regulations specific for the product in question
|
Section 15: Regulatory Information
a) Safety, health and environmental regulations specific for the product in question.
|
|
Section 16: Other Information
Other information including information on preparation and revision of SDS
|
Section 16: Any other relevant information
|