|
|
|
|
Section 1: Identification of the Substance or Mixture and of the Supplier
- GHS product identifier
- Other means of identification
- Recommended use of the chemical and restrictions on use
- Supplier’s details (including name, address, phone number etc.)
- Emergency phone number
|
Section 1: Identification
- Product identifier
- Other means of identification (Not mandatory in Tasmania)
- Recommended use of the chemical and restrictions on use
- Details of Australian manufacturer or importer: the name, full street address, phone number and email address if available
- Emergency phone number
Note: If an emergency information service or Poisons Information Centre phone number is provided in an SDS, this arrangement should be confirmed with the service beforehand and copies of the SDS should be provided to them.
|
|
Section 2: Hazards Identification
- GHS classification of the substance/mixture and any national or regional information
- GHS label elements including precautionary statements. (Hazard symbols may be provided as a graphical reproduction of the symbols in black and white or the name of the symbol e.g. "flame")
- Other hazards which do not result in classification (e.g. "dust explosion hazard") or are not covered by the GHS
|
Section 2: Hazard(s) identification
- Classification of the hazardous chemical in accordance with Australia's Work Health and Safety Regulations 2011 (GHS).
- Label elements, including precautionary statements
|
|
Section 3: Composition/Information on Ingredients
Substance
- Chemical identity
- Common name, synonyms, etc.
- CAS number and other unique identifiers
- Impurities and stabilizing additives which are themselves classified and which contribute to the classification of the substance
Mixture
- Chemical identity
- Concentration or concentration ranges of all ingredients which are hazardous within the meaning of the GHS and are present above their cut-off levels
NOTE: For information on ingredients, the competent authority rules for CBI take priority over the rules for product identification.
|
Section 3: Composition and information on ingredients
- Disclosure of ingredient names
- Disclosure of proportions of ingredients
See Trade Secrets for more information.
|
|
Section 4: First-Aid Measures
- Description of necessary measures subdivided according to the different routes of exposure, i.e. inhalation, skin and eye contact and ingestion
- Most important symptoms/effects, acute and delayed
- Indication of immediate medical attention and special treatment needed if necessary
|
Section 4: First-aid measures
GHS fully implemented.
|
|
Section 5: Fire-Fighting Measures
- Suitable and unsuitable extinguishing media
- Specific hazards arising from the chemical (e.g. nature of any hazardous combustion products)
- Special protective equipment and precautions for fire fighters
|
Section 5: Fire-fighting measures
GHS fully implemented.
Hazchem or Emergency Action Code: for chemicals that are classified as dangerous goods by the criteria of the Australian Dangerous Goods Code (ADG Code) for Transport by Road and Rail, the Hazchem Code allocated in the ADG Code must be included to provide information of emergency services.
|
|
Section 6: Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Environmental precautions
- Methods and materials for containment and cleaning up
|
Section 6: Accidental release measures
GHS fully implemented.
|
|
Section 7: Handling and Storage
- Precautions for safe handling
- Conditions for safe storage including any incompatibilities
|
Section 7: Handling and storage, including how the chemical may be safely used
GHS fully implemented.
|
|
Section 8: Exposure Controls/Personal Protection
- Control parameters e.g. occupational exposure limits or biological limit values
- Appropriate engineering controls
- Individual protection measures, such as personal protective equipment
|
Section 8: Exposure controls and personal protection
- Exposure control measures
- Biological monitoring
- Control Banding
- Engineering controls
- Individual protection measures, for example personal protective equipment (PPE)
See Occupational Exposure Limit for more information.
|
|
Section 9: Physical and Chemical Properties
- Physical state
- Colour
- Odour
- Melting point/freezing point
- Boiling point or Initial boiling point and boiling range
- Flammability
- Lower and upper explosion limits/flammability limit
- Flash point
- Auto-ignition temperature
- Decomposition temperature
- pH
- Kinematic viscosity
- Solubility(ies)
- Partition coefficient: n-Octanol/Water
- Vapour pressure
- Density and/or relative density
- Relative vapour density
- Particle characteristics
|
Section 9: Physical and chemical properties
- Appearance (physical state, colour, etc.)
- Odour
- Odour threshold
- pH
- Melting point/freezing point
- Initial boiling point and boiling range
- Flash point
- Evaporation rate
- Flammability (solid, gas)
- Upper/lower flammability or explosive limits
- Vapour pressure
- Vapour density
- Relative density
- Solubility
- Partition coefficient: n-octanol/water
- Auto-ignition temperature
- Decomposition temperature
- Viscosity
- Other physical or chemical parameters relevant to health and safety
|
|
Section 10: Stability and Reactivity
- Reactivity
- Chemical stability
- Possibility of hazardous reactions
- Conditions to avoid
- Incompatible materials
- Hazardous decomposition products
|
Section 10: Stability and Reactivity
GHS fully implemented.
|
|
Section 11: Toxicological Information
Concise but complete and comprehensible description of the various toxicological effects and available data used to identify those effects including:
- Information on the likely routes of exposure (inhalations, ingestion, skin and eye contact)
- Symptoms related to the physical, chemical and toxicological characteristics
- Delayed and immediate effects and also Chronic effects from short and long-term exposure
- Numerical measures of toxicity (such as acute toxicity estimates)
|
Section 11: Toxicological information
Information on the following hazards should be presented in the order:
- Acute toxicity
- Skin corrosion/irritation
- Serious eye damage/irritation
- Respiratory or skin sensitisation
- Germ cell mutagenicity
- Carcinogenicity
- Reproductive toxicity
- Specific Target Organ Toxicity (STOT) – single exposure
- Specific Target Organ Toxicity (STOT) – repeated exposure
- Aspiration hazard.
- Information on possible routes of exposure
- Early onset symptoms related to exposure
- Delayed health effects from exposure
- Exposure levels and health effects
- Interactive effects
- Other information
|
|
Section 12: Ecological Information
- Ecotoxicity (aquatic and terrestrial, where available)
- Persistence and degradability
- Bioaccumulative potential
- Mobility in soil
- Other adverse effects
|
Section 12: Ecological information
GHS fully implemented.
|
|
Section 13: Disposal Considerations
Description of waste residues and information on their safe handling and methods of disposal, including the disposal of any contaminated packaging
|
Section 13: Disposal considerations
- Disposal containers and methods
- Physical/chemical properties that may affect disposal options
- Effects of sewage disposal.
- Special precautions for incineration or landfill
|
|
Section 14: Transport Information
- UN number
- UN proper shipping name
- Transport hazard class(es)
- Packing group if applicable
- Environmental hazards (e.g. marine pollutant (Yes/No))
- Transport in bulk
- Special precautions which a user needs to be aware of, or needs to comply with, in connection with transport or conveyance either within or outside their premises
|
Section 14: Transport information
- UN number
- Proper shipping name or Technical Name
- Transport hazard class
- Packing Group
- Environmental hazards for Transport Purposes
- Special Precautions for user
- Additional Information
- Hazchem or Emergency Action Code (Not mandatory in Tasmania).
|
|
Section 15: Regulatory Information
Safety, health and environmental regulations specific for the product in question
|
Section 15: Regulatory information
Safety, health and environmental regulations
|
|
Section 16: Other Information
Other information including information on preparation and revision of SDS
|
Section 16: Any other relevant information
- The date of preparation of the latest revision of the SDS
- A key/legend regarding abbreviations and acronyms used in the SDS
|