|
|
|
|
Section 1: Identification of the Substance or Mixture and of the Supplier
- GHS product identifier
- Other means of identification
- Recommended use of the chemical and restrictions on use
- Supplier’s details (including name, address, phone number etc.)
- Emergency phone number
|
Section 1: Company and Chemical Product Identification
- Product identifier (if mixture, common national or international name, commercial name is optional)
- Restrictions and use recommendations
- Details of the supplier of the SDS in Chile, including name, address, contact telephone number and email address
- Information of the manufacturer can also be provided
- Emergency contact telephone number in Chile (available 24/7). This service should have the SDS and provide chemical/toxicological emergency response when necessary
|
|
Section 2: Hazards Identification
- GHS classification of the substance/mixture and any national or regional information
- GHS label elements including precautionary statements. (Hazard symbols may be provided as a graphical reproduction of the symbols in black and white or the name of the symbol e.g. "flame")
- Other hazards which do not result in classification (e.g. "dust explosion hazard") or are not covered by the GHS
|
Section 2: Hazard Identification
- Health, environmental, and physical/chemical hazards
- GHS label
- Description of specific hazards, in accordance with sections 9 to 12 of the safety data sheet
- Classification according to Title III of Decree 57/2019
- Safety signals according to Decree 57/2019
|
|
Section 3: Composition/Information on Ingredients
Substance
- Chemical identity
- Common name, synonyms, etc.
- CAS number and other unique identifiers
- Impurities and stabilizing additives which are themselves classified and which contribute to the classification of the substance
Mixture
- Chemical identity
- Concentration or concentration ranges of all ingredients which are hazardous within the meaning of the GHS and are present above their cut-off levels
NOTE: For information on ingredients, the competent authority rules for CBI take priority over the rules for product identification.
|
Section 3: Composition and Information on Hazardous Ingredients
Clearly indicate if product is a Substance or Mixture
Substance
- Chemical identity
- Common name
- CAS number - when not available, UN number or other identifier
- Chemical identity of an impurity, a stabilizing additive or an individual component other than the main component, which contribute to the classification of the substance.
Mixture
- Chemical identity (IUPAC name of each component if existent)
- Common name
- CAS number - when not available: UN number or other identifier
- Concentration range of all substances classified as hazardous (indicated as exact or range percentage in descending order)
- It is not necessary to provide the complete composition, as long as the component does not contribute to the hazard of the mixture
See Trade Secrets for more information.
|
|
Section 4: First-Aid Measures
- Description of necessary measures subdivided according to the different routes of exposure, i.e. inhalation, skin and eye contact and ingestion
- Most important symptoms/effects, acute and delayed
- Indication of immediate medical attention and special treatment needed if necessary
|
Section 4: First-Aid Measures
- Emergency handling summary
- First-Aid measures including, in the case of inhalation, skin and eye contact, ingestion or other as well as in the case of repeated overexposure and information must be provided for medical purposes
- Most important symptoms and effects, both acute and delayed
|
|
Section 5: Fire-Fighting Measures
- Suitable and unsuitable extinguishing media
- Specific hazards arising from the chemical (e.g. nature of any hazardous combustion products)
- Special protective equipment and precautions for fire fighters
|
Section 5: Fire-Fighting Measures
- Suitable and unsuitable extinguishing media
- Specific hazards arising from the chemical (e.g. nature of any hazardous combustion products)
- Special protective equipment
- Precautionary measures for fire fighters and/or first responders
|
|
Section 6: Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Environmental precautions
- Methods and materials for containment and cleaning up
|
Section 6: Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Environmental precautions
- Methods and materials for containment and cleaning up
- Additional disaster prevention measures, for example measures to avoid collateral effects due to spill, leak or loss
|
|
Section 7: Handling and Storage
- Precautions for safe handling
- Conditions for safe storage including any incompatibilities
|
Section 7: Handling and Storage
Handling:
- Technical Recommendations
- Precautionary measures for safe handling
Storage:
- Conditions for safe storage, consistent with the indications established in Supreme Decree No. 43/15
- Technical Recommendations
Incompatibilities:
- Package or container material
|
|
Section 8: Exposure Controls/Personal Protection
- Control parameters e.g. occupational exposure limits or biological limit values
- Appropriate engineering controls
- Individual protection measures, such as personal protective equipment
|
Section 8: Occupational Exposure Controls and Personal Protection
- Appropriate engineering controls, including ventilation
- Personal protective equipment, including respiratory, hand, eye, skin and body protective equipment
- Environmental exposure controls
- Occupational exposure limits
|
|
Section 9: Physical and Chemical Properties
- Physical state
- Colour
- Odour
- Melting point/freezing point
- Boiling point or Initial boiling point and boiling range
- Flammability
- Lower and upper explosion limits/flammability limit
- Flash point
- Auto-ignition temperature
- Decomposition temperature
- pH
- Kinematic viscosity
- Solubility(ies)
- Partition coefficient: n-Octanol/Water
- Vapour pressure
- Density and/or relative density
- Relative vapour density
- Particle characteristics
|
Section 9: Physical and Chemical Properties
- Physical state
- Color, odor and appearance
- pH
- Melting point/freezing point
- Initial boiling point and boiling range
- Flash point
- Evaporation rate
- Flammability (solid/gas)
- Lower and upper explosion/flammability limits
- Vapor pressure
- Density and/or relative density
- Solubility(ies)
- Partition coefficient: n-Octanol/Water
- Auto-ignition and decomposition temperatures
- Viscosity
- Explosive properties
- Oxidizing properties
Other important physical and chemical parameters should be indicated where appropriate, such as miscibility, liposolubility (solvent - oil: to be specified), conductivity or gas group.
|
|
Section 10: Stability and Reactivity
- Reactivity
- Chemical stability
- Possibility of hazardous reactions
- Conditions to avoid
- Incompatible materials
- Hazardous decomposition products
|
Section 10: Stability and Reactivity
- Reactivity
- Chemical stability
- Possibility of hazardous reactions
- Conditions to avoid
- Incompatible materials
- Hazardous decomposition products
|
|
Section 11: Toxicological Information
Concise but complete and comprehensible description of the various toxicological effects and available data used to identify those effects including:
- Information on the likely routes of exposure (inhalations, ingestion, skin and eye contact)
- Symptoms related to the physical, chemical and toxicological characteristics
- Delayed and immediate effects and also Chronic effects from short and long-term exposure
- Numerical measures of toxicity (such as acute toxicity estimates)
|
Section 11: Toxicological Information
- Symptoms related to the physical, chemical and toxicological characteristics
- Delayed and immediate effects and also Chronic effects from short and long-term exposure
- Specific target organ toxicity – Single and repeated exposure
- Interactive effects
- Information on the likely routes of exposure (inhalations, ingestion, skin and eye contact)
|
|
Section 12: Ecological Information
- Ecotoxicity (aquatic and terrestrial, where available)
- Persistence and degradability
- Bioaccumulative potential
- Mobility in soil
- Other adverse effects
|
Section 12: Ecotoxicological Information
- Ecotoxicity (aquatic and terrestrial, where available)
- Persistence and degradability
- Bioaccumulation potential
- Mobility in soil
- Other adverse effects
|
|
Section 13: Disposal Considerations
Description of waste residues and information on their safe handling and methods of disposal, including the disposal of any contaminated packaging
|
Section 13: Information on Disposal
- Information on safe handling and environmentally preferred disposal/waste residue according to Chilean regulations
- Disposal information for contaminated containers and packaging according to Chilean regulations
|
|
Section 14: Transport Information
- UN number
- UN proper shipping name
- Transport hazard class(es)
- Packing group if applicable
- Environmental hazards (e.g. marine pollutant (Yes/No))
- Transport in bulk
- Special precautions which a user needs to be aware of, or needs to comply with, in connection with transport or conveyance either within or outside their premises
|
Section 14: Information on Transport
- UN number/shipping name
- Transport hazard class(s) (marine, air, ground)
- Packaging group, if applicable
- Environmental hazards and special precautions of which the user needs to be aware or needs to comply with
- MARPOL 73/78 gross transportation information
- IBC Code Annex II
|
|
Section 15: Regulatory Information
Safety, health and environmental regulations specific for the product in question
|
Section 15: Regulatory Information
- Any national or international relevant regulation, including any applicable EHS technical norms. Some of the national regulations that can apply: NCh2245:2021, NCh1411/4-2001, NCh382:2021, NCh2190Of2019 and Supreme Decree 594/1999.
- The supplier should include the following paragraph: The receiver should verify the possible existence of local regulations applicable to the chemical. In Spanish: "El receptor debería verificar la posible existencia de regulaciones locales aplicables al producto químico."
|
|
Section 16: Other Information
Other information including information on preparation and revision of SDS
|
Section 16: Other Information
Other information and information on the preparation and revision of the SDS, such as:
- Control of document changes, for instance, where have changes been made compared to the previous version
- Explanation of abbreviations and acronyms used
- References to the basic documents and data sources used on the preparation
- SDS creation date, revision date and next revision date as well
Optional to appear on this section according to NCh 2245:2021:
- Safety sign according to NCh 1411/4 for material risk identification, if NCh 1411/4 applies.
- The following phrase should be included:
- In this act, it is recorded that the information provided in this document is timely and transparent, in accordance with the requirements of national and international standards, in turn, it is established that the inappropriate use of this product, kit or substance could cause damage to people, private property and/or the environment. It is advisable to read this document carefully and contact an expert for guidance if you require assistance. In Spanish: En este acto se deja constancia que la información vertida en el presente documento es oportuna y transparente, conforme a los requerimientos de las normas nacionales e internacionales, a su vez, se establece que el uso inapropiado de este producto, kit o sustancia podría generar daños en las personas, propiedad privada y/o medio ambiente. Se aconseja, leer detenidamente el presente documento y contactar a un experto para que lo oriente en caso de requerir asistencia.
|