¶ Recent Updates2025
|
|
¶ Background |
|
|
Ireland is a sovereign, independent and democratic state, headed by an elected President. The executive power is exercised by the Government which is headed by the Taoisech (Prime Minister) and the Council of Ministers, who are appointed by the President. The legislative power rests with the Houses of the Oireachtas, (National Parliament) which consists of the President, the Dáil Éireann (House of Representatives) and the Seanad Éiraan (Senate). The Irish legal system, as established under the Constitution of 1937, is made up of primary legislation, Acts of the Oireachtas and secondary legislation, Statutory Instruments (SIs), including Regulations, Rules and Orders. The judicial system is exercised by the Supreme Court and the High Court. As a Member State of the European Union, all European Union Regulations apply directly in Ireland, while EU Directives require transposition into national legislation by the Oireachtas in order to be applicable within Ireland. Directives are used to bring different national laws into line with each other, and are particularly common for subjects affecting the operation of the single market (e.g., product safety). |
Helpdesks CLP + REACH Health and Safety Authority Metropolitan Building James Joyce Street Dublin 1 BPR Pesticide Registration and Control Division Dept of Agriculture, Food and the Marine
|
¶ Inventories |
|
|
See European Union pages: |
|
¶ Substance Registration |
|
¶ REACHSee European Union page: REACH ¶ Enforcement in IrelandIn order to ensure the full implementation and enforcement of REACH and CLP Regulation requirements, Ireland adopted the Chemical Act No. 13 of 2008 and the Chemicals (Amendment) Act No. 32 of 2010. The Chemicals Act aims to regulate and control the manufacture, use, placing on the market, export, import, transport, testing, storage, classification, labelling, and packaging of chemicals. It also makes certain provisions in relation to other European Regulations, including EU Regulation (EC) No 1272/2008 on the Classification, Labelling and Packaging of Substances and Mixtures (CLP) Regulation, the 'Rotterdam' EU Regulation (EC) No 689/2008 concerning the export and import of dangerous chemicals under the Rotterdam Convention, and the Detergents Regulation EC/648/2004. Part 3 of the Chemicals Act designates the national authorities in Ireland for the purpose of each European Regulation. For REACH, the Health and Safety Authority (HSA) is the lead enforcement authority in Ireland, alongside the Department of Agriculture, Fisheries and Food (DAFF), which is the lead authority in relation to pesticides, and the Environmental Protection Agency (EPA), which is responsible for environmental pollution prevention and control. |
Sources
|
¶ Product Registration |
|
¶ Biocidal Products AuthorisationIn addition to the directly applicable requirements of EU Regulation No. 528/2012, the European Union (Biocidal Products) Regulations 2013, SI No. 427 of 2013 regulate the authorisation process and the registration procedures that apply when intending to place biocidal products on the market within Ireland. The designated authority in Ireland relating to the control of the use and marketing of biocidal products is the Pesticides Registration and Control Division (PRCD). The Pesticide Control Division (PCD) of the Department of Agriculture, Food and the Marine (DAFM) is responsible for the evaluation of authorisation applications. Applications for national product authorisation to place a product within Ireland, renewal of an authorisation and changes to an authorisation must be submitted via the European Chemicals Agency (ECHA) using the Register for Biocidal Products (R4BP). The producer and/or importer of a biocidal product must submit the following documentation to the PCD:
Succesful authorisations are granted by the PCD with a certificate known as the PCS Number. Any modification affecting the product´s composition, hazardous properties or even packaging form must be notified directly to the PCD. The Pesticides Control Laboratory (PCL) of the Department of Agriculture, Food and Marine (DAFM) provides further analytical support to the PCD relating to the composition and analysis of biocidal products, including pesticides. Prior to placing a biocide on the market, products must be registered with DAFM in Ireland. If products contain an active substance still under review or ‘in progress’ such as Ethanol, the product will then fall under transitional measures. A notification application must be submitted to: biocide-notifications@agriculture.gov.ie The application form for the notification of biocidal products can be downloaded from: Applicants must submit together with the completed notification form:
Notification holders of biocidal products must also fulfill the EU approval of the active substance(s)/product-type combination, according to the product-type and obtain the necessary autorisation according to the BPR. In the case of a Union authorisation the notification must be sent to ECHA and the Commission. All notifications must be sent through R4BP 3. If the product contains an ‘approved’ active substance and it is after the ‘date of approval’ such as Propan-2-ol (IPA), an Art. 55 derogation to the authorisation is required. Article 95 of the Biocidal Products Regulation requires suppliers of active substances for use in biocidal products to have obtained a letter of access to an active substance dossier, to have submitted their own dossier to the European Chemicals Agency, or to be a participant in the European Commission’s on-going review programme of active substances. A copy of the product Safety Data Sheet MUST be submitted the National Poison’s Information Centre in Ireland, this is a mandatory legal requirement. https://www.poisons.ie/Manufacturers/ProductRegistration ¶ FeesSince February 15, 2024, fees relating to the authorisation were set under this table accessible online: Biocide Fees Effective From 15th February 2024 150224.pdf They start from EUR 75,000 for a single product (Union authorisation) up to EUR 150,000 for a product family (Union authorisation) and EUR 300 for same product authorised and pending (Union authorisation). These fees are applicable for administrative changes or transfer of authorisations, as set by the Pesticides Registration and Control Division on the basis of European Biocidal Products Regulation and the European Union (Biocidal Products) Regulations 2013, SI No. 427. |
Sources
Resources
Navigate to: EU Biocidal Products |
¶ Biocidal Products RegisterThe European Union (Biocidal Products) Regulations 2013, SI No. 427 of 2013 requires a Register of Biocidal Products placed on the market in Ireland to be kept up to date. The designated authority is the Pesticides Registration and Control Divisions (PCD). The Register of Biocidal Products is kept regularly up to date with the list of biocidal products for which an authorisation has been obtained or a notification has been made prior to placing it on the market. A notification is required in the event that the active substance contained in the product has not yet been included in the list of approved substances by product-type (Article 9), or in the event that the biocidal product is not yet covered under the provisions of Chapters IV, V, VI, VII and VIII relating to authorisation requirements of the BPR, the product must be notified according to the National Notification System regulated under SI No. 427 of 2013. Notifications must be submitted to the Department of Food and the Marine (DAFF) via the email: biocide-notificationsagriculture.gov.ie The notification form consists of the following sections:
The following supporting documents must be submitted alongside the application form (as specified above):
The PCD will inform the Minister for Agriculture, Food and the Marine of any amendments to a issues notifications and of any notification cancellations. Annual Registration Fees Annual Registration Fees (ARF) apply to biocides in order to maintain the products listed on the Register. The ARF are due on 31st December of each year, as follows:
In the case of biocides that are both aimed for amateur and professional use, the flat fee of EURO 225 applies. Failure to pay the fee on time will result in the revocation of the PPPs from the register. Late fees will be applied for the purpose of re-registering the product, as follows:
The person responsible for placing biocidal products on the market must provide the following information of the product to the Poisons Information Centre (PIC), Beaumont Hospital, Dublin:
|
Sources
Resources
Authority Contact Details: Pesticides Registration and Control Divisions (PCD) Department of Agriculture, Food and the Marine Laboratories www.pcs.agriculture.gov.ie |
¶ Plant Protection ProductsEU Regulation (EC) No 1107/2009 concerning the placing of plant protection products on the market and repealing Council Directives 79/117/EEC and 91/414/EC applies directly in Ireland. European Communities (Plant Protection Products) Regulations 2012 (S.I. No. 159 of 2012) provides further administrative measures relating to placing plant protection products on the market within Ireland. ¶
|
Sources
Resources
PRCD Contact Information: PRCD - Plant Protection Products Pesticide Registration and Control Division E-mail: pcs@agriculture.gov.ie or CLPPesticides@agriculture.gov.ie Telephone: 00-353-1- 6157552 Navigate to: EU Plant Protection Products |
¶ Notifications |
|
¶ C&L NotificationSee European Union page: C&L Notification ¶ Poison CentreSee European Union page: Poison Centres |
|
¶ Restrictions and Bans |
|
¶ Restrictions under REACHSee European Union page: Restrictions under REACH |
|
¶ Authorisation under REACHSee European Union page: Authorisation under REACH |
|
¶ Restriction of Hazardous Substances (RoHS)See European Union page: Restriction of Hazardous Substances (RoHS) ¶ RoHS in IrelandThe European Union (Restriction of Certain Hazardous Substances in Electrical and Electronic Equipment) Regulations 2012 (S.I. No. 513 of 2012) transpose Directive 2011/65/EU (RoHS). The Environmental Protection Agency is the appointed authority for enforcing RoHS regulations. The Regulations have been adopted by the Minister for the Environment, Community and Local Government pursuant to the Waste Management Act 1996 (No. 10 of 1996). The 2012 Regulations were published in the Iris Oifigiúil on December 28, 2012 and entered into force on January 2, 2013. Amending Regulations have been adopted in order to give effect to the provisions of Commission Delegated Directive amending, for the purposes of adapting to scientific and technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council. Among the most recent amendments that have been adopted since 2021 are the following Statutory Instruments: 2024 Amendments
2023 Amendments
2022 Amendments
2021 Amendments
Prior to 2020, the Regulations were amended multiple times to incorporate the progress made under European Directives, including Commission Delegated Directive (EU) 2015/863 and Commission Directive (EU) 2017/2102. Amendments include those made by the European Union (Restriction of Certain Hazardous Substances in Electrical and Electronic Equipment) (Amendment) Regulations 2017, S.I. No. 44 of 2017. Later, the European Union (Restriction of Certain Hazardous Substances in Electrical and Electronic Equipment) (Amendment) Regulations 2019 (S.I. No. 246 of 2019) of June 5, 2019 were published on June 7, 2019. The 2019 Regulations give effect to the provisions of Commission Directive (EU) 2017/2102 of 15 November 2017 amending Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment. It is a recast of the RoHS Directive 2002/95/EC, referred to as “RoHS 2 recast.” RoHS 2 Directive 2001/65/EU came into force on July 21, 2011. Ireland implemented RoHS 2 recast through the 2012 Regulations. |
Sources
Resources |
¶ Persistent Organic Pollutants (POPs)See European Union page: Persistent Organic Pollutants (POPs) ¶ Persistent Organic Pollutants in IrelandRegulation (EC) 850/2004, as last amended by Commission Regulation 2016/460/EU, on Persistent Organic Pollutants (POPs) is directly applicable in Ireland. It implements both the Stockholm Convention and the UNECE POPs Protocol. The Convention also requires Parties to adopt the necessary measures to reduce releases of POPs. The Persistent Organic Pollutants Regulations 2010, SI No. 235 of 2010, entered into force on May 31, 2010. They provide the legal basis for implementing Ireland’s obligations under the Stockholm Convention on Persistent Organic Pollutants. The Environmental Protection Agency (EPA) is the designated authority for the purpose of the EU POPs Regulation and for ensuring the necessary measures are implemented for the control of the production, placing on the market, and use of POPs in Ireland. It should be noted that other public authorities also have a key role in the management and control of POPs, including:
Ireland became a Party to the Stockholm Convention on November 3, 2010 and as such it is required to prepare a National Implementation Plan (NIP) on POPs. The EPA prepared Ireland’s National Implementation Plan on Persistent Organic Pollutants (POPs) in 2012. NIPs are required to be regularly updated in order to take into account technical progress and inclusion of additional POPs under the scope of the Convention. Except when exempted, nineteen of the intentionally produced POPs are subject to a ban on production and use. Banned POPs:
Other chemicals such as, DDT are severely restricted under the provisions of the Stockholm Convention. The unintentional production of POPs, including dioxins, PCBs, HCB and pentachlorobenzene (PeCB) is required to be reduced via the implementation of abatement technologies and substitute process technology until its complete elimination. POP inventories are required to be kept for substances listed under Annex III that are released into the air, water and land. |
Sources |
¶ Ozone Depleting SubstancesSee European Union page: Ozone Depleting Substances |
|
¶ SDS + Label |
|
¶ ClassificationSee European Union page: Classification The CPL Preps Regulations are now made obsolete with the full implementation of the CLP Regulations from June 1, 2015 onward. Regulations SI. No. 196 of 2015 revokes the previous regulatory system established by the CPL Regulations 2003 – 2008. However, mixtures already classified, labelled and packaged according to CPL and placed on the market before 1 June 2015 had to be re-labelled and re-packaged according to CLP by 1 June 2017. The Chemicals Act 2008 and 2010 (Part 6, Section 3), establishes the applicable fines and penalties that are set for offences and non-compliances under the EU CLP Regulation, including fines from EUR 5,000 to a maximum of EUR 3 million and even imprisonment of up to two years, depending on conviction. According to Section 8(3A) of the Chemicals Act 2008 and 2010, there are several authorities that have been appointed in Ireland for the purpose of ensuring compliance and facilitating the implementation of the EU CLP Regulation within Ireland. Such authorities include the Health and Safety Authority (HSA) in relation to chemical substances and mixtures, the Department of Agriculture, Fisheries and Food (DAFF) in relation to pesticides and the Beaumont Hospital Board for the purpose of Article 45 of the CLP for the purpose of receiving information relating to emergency health response. |
Sources |
¶ Safety Data SheetSee European Union page: Safety Data Sheet Safety Data Sheets must be written in English according to the Chemicals Act (CLP Regulation) Regulations 2011, SI No. 102. |
|
¶ LabelSee European Union page: Label The Chemicals Act (CLP Regulation) Regulations 2011, SI No. 102 of 2011 designate English as the official language in Ireland for the purpose of labelling hazardous substances and mixtures. |
|
¶ Plant Protection Product LabelPlant Protection Products must be provided with a label including a text box with the hazard statements, precautionary statements, pictograms and signal words stipulated by the CLP Regulation (EC) No 1272/2008. The PRCD issued guidance on the label content which must typically include safety information in a text box on the front panel of the product with the heading "Safety Information." This text box must be placed in a prominent position and cover a significant proportion of the main panel area. It should be noted that the PCS number must be placed inside the bottom right hand corner of the text box. The PCS number is provided in the certificate of authorisation issued by the PRCD. For smaller sized products of maximum 300 millimiters or grams, the text box may not fit on the front panel of the product, the safety information may be placed elsewhere such as in a separate leaflet. All labels must be approved by the Pesticide Control Division. |
Sources |
¶ Trade SecretsSee European Union page: Trade Secrets |
|
¶ Occupational Exposure LimitsSee European Union page: Occupational Exposure Limits |
|
¶ Chemical AgentsOn December 21, 2025, Ireland’s Health and Safety Authority with the consent from the Minister of State at the Department of Enterprise, Tourism and Employment, made effective the 2025 Code of Practice (CoP) for the Safety, Health and Welfare at Work (Exposure to Asbestos) Regulations, 2006-2025 in accordance with section 60 of the Safety, Health and Welfare at Work Act 2005 (No. 10 of 2005). Notice of the publication of this Code of Practice was published in the Iris Oifigiúil on December 23, 2025. The 2025 CoP stipulates the asbestos occupational exposure limit values based on an 8-hour reference period, a time-weighted average (TWA) concentration of airborne substances. The current limit value is 0.1 fibers per cubic centimeter (fibers/cm) for all types of asbestos fibers. The CoP 2025 introduces the provision that until December 20, 2029, the applicable limit value is set at 0.01 fibers/cm3 for fibers with a length of more than 5 micrometers, a breadth of less than 3 micrometers and a length/breadth ratio greater than 3:1 shall be taken into consideration. From December 20, 2029, fibers with a breadth of less than 0.2 micrometers shall also be taken into consideration. From December 20, 2029, the 0.02 fibre/cm3 limit value will also apply to fibres. With the approval of this Code of Practice, in conjunction with the Asbestos Regulations, the following European Directives have been transposed: • Directive 2009/148/EC of the European Parliament and of the Council of 30 November 2009 on the protection of workers from the risks related to exposure to asbestos at work; • Directive (EU) 2023/2668 of the European Parliament and of the Council of 22 November 2023 on the protection of workers from the risks related to exposure to asbestos at work. The 2024 Code of Practice for the Safety, Health and Welfare at Work (Chemical Agents) Regulations (2001-2021) and Safety, Health and Welfare at Work (Carcinogens) Regulations 2024 was published by Ireland's Health and Safety Authority (HSA) and is effective from April 5, 2024. It replaces the previous 2021 CoP. The Safety, Health and Welfare at Work (Chemical Agents) Regulations, 2001 transpose European Union Directive 98/24/EC on the protection of the health and safety of workers from the risks related to chemical agents at work. Several amendments have been adopted to the 2001 Regulations, including the Safety, Health and Welfare at Work (Chemical Agents) (Amendment) Regulations, 2015 and more recently, the Safety, Health and Welfare at Work (Chemical Agents) (Amendment) Regulations , 2021. The Safety, Health and Welfare at Work (Chemical Agents) Regulations, 2001, the amendments of 2015 and 2021 are cited together as the Safety, Health and Welfare at Work (Chemicals Agents) Regulations 2001 to 2021. The 2024 Code of Practice for the Chemical Regulations was published by Ireland's Health and Safety Authority (HSA) and updates the following:
Occupational Exposure Limit Values (OELVs) are exposure standards established for chemical agents and are mainly expressed as a time-weighted average (TWA) over an 8-hour reference period or a 15-minute short term exposure limit (STEL) of concentrations of airborne substances. Indicative Occupational Exposure Limit Values (IOELVs) are health based limits established under the Chemical Agents Directive 98/24/EC. The European Commission is advised on limits by its Scientific Committee on Occupational Exposure Limits (SCOEL). IOELVs are listed in European Directives, which Member States are obliged to implement by introducing national limits for the substances. IOELVs which have been incorporated into the Code of Practice are indicated as such in the Notes column. |
Sources
|
¶ Transport |
|
| See European Union page: Transport | |