|
|
|
| |
Title Page
Proof of Safety Passport Registration is displayed
|
|
Section 1: Identification of the Substance or Mixture and of the Supplier
- GHS product identifier
- Other means of identification
- Recommended use of the chemical and restrictions on use
- Supplier’s details (including name, address, phone number etc.)
- Emergency phone number
|
Section 1: Names of product and applicant/manufacturer
- Name of a product or a chemical, as it appears in technical regulations applicable to the product (standards, laws, etc), trade name(s), synonyms, identifiers (CAS numbers, tariff codes, etc).
- Name and contact information of an applicant, including mailing address, phone number, e-mail and emergency contacts. If any restrictions on contacts exist (such as operating hours), they should be included in this section.
- Brief description of a product, recommended uses and restrictions on uses.
|
|
Section 2: Hazards Identification
- GHS classification of the substance/mixture and any national or regional information
- GHS label elements including precautionary statements. (Hazard symbols may be provided as a graphical reproduction of the symbols in black and white or the name of the symbol e.g. "flame")
- Other hazards which do not result in classification (e.g. "dust explosion hazard") or are not covered by the GHS
|
Section 2: Hazard(s) identification
- Information on hazards, especially those critical to life and health of people, plants, animals and the environment.
- Hazard class according to GOST 12.1.007. These classes include: extremely hazardous, hazardous, moderately hazardous, and low hazardous. The classification is based on values of OEL MAC, LD50/LC50, and similar criteria.
- Signal word or symbol corresponding to the above classification, as well as brief description of the hazard and precaution measures. Symbols are not required and could be replaced by their descriptions, such as "flame" or "skull and crossbones".
- Values of MAC in the workplace air, as well as in the atmosphere, water and soil.
- Descriptions of likely routes of exposure, such as inhalation, skin contact, etc.
- Assessments of health effects, including those caused by unintended use (description of symptoms).
- Information on other hazards, which do not result in classification, but influence the overall hazard of the product. For example: dust explosion hazard, freeze burn hazard, effect on soil bacteria and others.
|
|
Section 3: Composition/Information on Ingredients
Substance
- Chemical identity
- Common name, synonyms, etc.
- CAS number and other unique identifiers
- Impurities and stabilizing additives which are themselves classified and which contribute to the classification of the substance
Mixture
- Chemical identity
- Concentration or concentration ranges of all ingredients which are hazardous within the meaning of the GHS and are present above their cut-off levels
NOTE: For information on ingredients, the competent authority rules for CBI take priority over the rules for product identification.
|
Section 3: Composition/Information on chemical substances
- This section should provide information on chemical substances composing a product, including impurities and stabilizing additives.
- Chemical substances should be identified by a formula and chemical name(s) according to international registries.
- For mixtures, it is allowed to list only components for which limits (such as MAC or OEL) are established in laws or technical regulations. Values of MAC in the workplace air must be indicated, as well as concentrations of such components in the mixture in mass and volume % in descending order.
- When data on hazard of a mixture as a whole is absent and concentrations of components are listed as ranges, health hazards should be determined based on the highest concentration value in the range.
- When components containing confidential information are present in the mixture, some data must be disclosed to the extend ensuring safety of users. A statement should be included indicating existence of confidential information which is not disclosed in the SDS.
See Trade Secrets for more information.
|
|
Section 4: First-Aid Measures
- Description of necessary measures subdivided according to the different routes of exposure, i.e. inhalation, skin and eye contact and ingestion
- Most important symptoms/effects, acute and delayed
- Indication of immediate medical attention and special treatment needed if necessary
|
Section 4: First-aid measures
- First aid measures applicable to the product should be described. If a situation is possible when treatment by a health care professional must be performed immediately after an incident, such situations must be described. It should be indicated whether a certain specialist (such as toxicologist, dermatologist, etc) is required.
- Measures that can be performed on a spot of an incident by an untrained person: moving a victim to the fresh air, removing contaminated clothes, etc.
- Possible long-term effects of the exposure.
- General first aid measures in cases of exposure to any chemical, grouped by routes of entry (inhalation, oral, skin and eye contact, etc).
- Any specialized equipment required for first aid.
- Any medical check ups or specific tests required for monitoring long-term effect of the exposure. Information on antidotes, if available and any medicines to avoid.
|
|
Section 5: Fire-Fighting Measures
- Suitable and unsuitable extinguishing media
- Specific hazards arising from the chemical (e.g. nature of any hazardous combustion products)
- Special protective equipment and precautions for fire fighters
|
Section 5: Firefighting measures
- General requirements on fire safety according to GOST 12.1.004 and applicable regulations of the Republic of Kazakhstan; type of fire hazard of the product.
- Measures of containing and extinguishing fires caused by the product or occurring near the product.
- Suitable extinguishing media.
- Unsuitable extinguishing media.
- Information on specific hazards caused by the chemical/product, its combustion products and/or thermal decomposition products. For example, "toxic gases are formed during combustion" or "oxides of sulfur and nitrogen are formed during combustion".
- Special precautions to follow, such as "cool containers by spraying water".
- PPE required when fighting a fire.
|
|
Section 6: Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Environmental precautions
- Methods and materials for containment and cleaning up
|
Section 6: Emergency measures
- Measures to ensure safety. Including, but not limited to: control of substances in the workplace, elimination of sources of ignition and dust, avoiding contact with eyes, skin and respiratory tract.
- Precautionary measures protecting the environment (soil, surface waters, etc.) and informing population of affected areas.
- Methods of neutralizing, deactivating and decontamination. Any preferred binding/absorbing agents, etc. If any methods are unsuitable, they should be noted.
|
|
Section 7: Handling and Storage
- Precautions for safe handling
- Conditions for safe storage including any incompatibilities
|
Section 7: Circulation and Storage
- Engineering controls and PPE required during manufacturing and circulation of products.
- Local and general ventilation, measures for preventing formation and/or ignition of aerosols and dusts.
- Any special requirements to electrical equipment, measures for preventing accumulation of static charges.
- Requirements for safe transportation of the product.
- Conditions and length of safe storage, including the following:
a) requirements for containers and warehouses, including isolating walls and ventilation;
b) list of incompatible materials, if any;
c) information on release of chemicals during storage, and effect of those materials on metal;
d) proper ranges of temperature, pressure, moisture and vibration; lightning (i.e. store in the dark) and environmental (i.e. covered by an inert gas) requirements;
e) stability of chemicals;
f) limits on weight of packages;
g) requirements for packaging and any other special requirements.
|
|
Section 8: Exposure Controls/Personal Protection
- Control parameters e.g. occupational exposure limits or biological limit values
- Appropriate engineering controls
- Individual protection measures, such as personal protective equipment
|
Section 8: Radiation protection and PPE
- Complete list of safety procedures for handling the product required for avoiding radiation and other risks.
- Parameters subject to control and their limits.
- Engineering controls that need to be implemented in addition to use of PPE (this information is related to and complementary to the information in the section 7).
- Types of PPE required for proper protection, including, but not limited to:
- filtering and air-supplying respirators, gloves and additional hand protection, coveralls, shoes and aprons indicating type and suitable material they should be made of.
- Any precaution related to personal hygiene, such as "no food, drinks or smoking is allowed".
|
|
Section 9: Physical and Chemical Properties
- Physical state
- Colour
- Odour
- Melting point/freezing point
- Boiling point or Initial boiling point and boiling range
- Flammability
- Lower and upper explosion limits/flammability limit
- Flash point
- Auto-ignition temperature
- Decomposition temperature
- pH
- Kinematic viscosity
- Solubility(ies)
- Partition coefficient: n-Octanol/Water
- Vapour pressure
- Density and/or relative density
- Relative vapour density
- Particle characteristics
|
Section 9: Physical and chemical properties
- Appearance, physical state (solid, liquid, gas) and color.
- Odor.
- pH of aqueous solution or aqueous extract (indicating concentration of such an extract).
- Boiling point and boiling point range.
- Melting (freezing) point.
- Flash point.
- Ignition temperature or explosive range.
- Aggregate state at ignition (solid, liquid, gas)
- Possibility and conditions of self-ignition.
- Oxidizing properties.
- Vapor pressure.
- Density, specific gravity.
- Solubility in water or organic solvents (indicate conditions).
- Partition coefficient in n-octanol/water.
- Decomposition temperature.
- Other parameters related to safety: vapor density, miscibility with other chemicals, evaporation rate, conductivity and density.
- If any of the above parameters are not applicable to the product, it should be noted. Additional parameters not mentioned in this section can also be included.
|
|
Section 10: Stability and Reactivity
- Reactivity
- Chemical stability
- Possibility of hazardous reactions
- Conditions to avoid
- Incompatible materials
- Hazardous decomposition products
|
Section 10: Stability and reactivity
- Propensity to reactions at normal conditions and in the environment of expected use and storage.
- Conditions that induce oxidation or polymerization.
- Conditions to avoid (temperature, light, shock, static charges, etc) and their brief description.
- List of substances or classes of products that upon contact may cause hazardous reactions (explosion, overheating, freezing, toxic gas formation, etc) and brief description of those reactions.
- List of hazardous decomposition products.
- List of byproducts that may form during storage or use.
- Presence of and/or need for stabilizers; possibility of exothermic reactions, possible change of aggregate state.
- Product's shelf life at the above mentioned conditions.
|
|
Section 11: Toxicological Information
Concise but complete and comprehensible description of the various toxicological effects and available data used to identify those effects including:
- Information on the likely routes of exposure (inhalations, ingestion, skin and eye contact)
- Symptoms related to the physical, chemical and toxicological characteristics
- Delayed and immediate effects and also Chronic effects from short and long-term exposure
- Numerical measures of toxicity (such as acute toxicity estimates)
|
Section 11: Toxicological information
- Toxicological properties (by degree of impact on human body, according to GOST 12.1.007).
- Brief, but complete description of toxicological impact on people in case of exposure.
- Main toxicological parameters and their values.
- Information on hazardous properties when contacted directly (by inhalation, ingestion, skin and eye contact, etc).
- Information on known long-term effects, including chronic, resulting from single exposure or chronic exposure. For example, sensitization, carcinogenicity, mutagenicity, reproductive toxicity, narcotic effects, etc. It should be noted whether the information is based on human or animal studies.
- Any special health effects of individual components of a mixture.
|
|
Section 12: Ecological Information
- Ecotoxicity (aquatic and terrestrial, where available)
- Persistence and degradability
- Bioaccumulative potential
- Mobility in soil
- Other adverse effects
|
Section 12: Ecological information
- Assessment of possible environmental effect of the product.
- Most important characteristics of the impact on the environment, including:
- Transformation in the environment (chemical and biological);
- Ability to bioaccumulate, persistence and biodegradation;
- Ecotoxicological data;
- Hygienic norms in different environments (MAC/TSEL in air, water, fishery water, soil);
- Any other information on harmful effects on the environment.
|
|
Section 13: Disposal Considerations
Description of waste residues and information on their safe handling and methods of disposal, including the disposal of any contaminated packaging
|
Section 13: Waste Management
- Safety precautions when handling waste resulting from use, storage and transport of a product, including emergency situations.
- Information on methods of disposal (incineration, recycling, reuse, etc). Precautions during incineration and landfill, such as preventing the waste reaching the sewage system.
- Information on places and methods of decontamination and disposal of the waste and packaging.
|
|
Section 14: Transport Information
- UN number
- UN proper shipping name
- Transport hazard class(es)
- Packing group if applicable
- Environmental hazards (e.g. marine pollutant (Yes/No))
- Transport in bulk
- Special precautions which a user needs to be aware of, or needs to comply with, in connection with transport or conveyance either within or outside their premises
|
Section 14: Transport information
- All safety precautions required for transportation and consumers according to GOST 19433 and specific requirements by applicable transportation regulations (auto, rail, air and sea).
- Classification according to GOST 19433: hazard class, code, symbol and symbol number resulting from the classification.
- UN number, UN shipping name, class and subclass, packing group.
- Indicate whether the product is designated as a marine pollutant, severe marine pollutant, or ecologically toxic substance.
- Any other special precautions which a user needs to be aware of, or needs to comply with, in connection with transport.
- Information on methods and quick response teams required for handling emergency situations during transport.
|
|
Section 15: Regulatory Information
Safety, health and environmental regulations specific for the product in question
|
Section 15: Regulatory Information
- Information about label in Kazakh and Russian languages.
- Regulations pertaining protection of people and the environment. Users should be informed about national laws, standards and technical regulations.
|
|
Section 16: Other Information
Other information including information on preparation and revision of SDS
|
Section 16: Information on certain types of chemical products according to applicable technical regulations
- Data sources used in creating the Safety Passport.
- Recommendations on training.
- Recommended uses and restrictions on uses.
- Possible contact information regarding safe circulation of chemical products.
|