¶ GHS Revision 8 |
¶ Implemented by Türkiye |
|
Section 1: Identification of the Substance or Mixture and of the Supplier
|
Section 1: Identification of the Substance or Mixture and of the Supplier
Per Annex 2 of KKDIK Regulation, references to Emergency Information Services should be provided. Emergency phone number of the Ministry of Health National Poison Center be given: 114 (24/7) also references to Emergency Information Services 112 should be provided. Firefighting 110 Emergency Hotline +90 212 375 5231 If availability of such services is limited for any reason, like hours of operation, or limits on specific types of information provided, these shall be clearly given. |
|
Section 2: Hazards Identification
|
Section 2: Hazard(s) Identification The hazard classifications are done according to harmonized CLP Regulation, which was published December 11, 2013 and amended on December 10, 2020. Turkish CLP Regulation harmonizes the former Regulation for Classification, Labelling & Packaging of dangerous substances and preparations with the EU CLP Regulation
|
|
Section 3: Composition/Information on Ingredients Substance
Mixture
NOTE: For information on ingredients, the competent authority rules for CBI take priority over the rules for product identification. |
Section 3: Composition/Information on Ingredients Substance The chemical identity of the main constituent which is classified and contributes to the classification of the substance, including impurity, stabilizing additive shall be given as below:
Mixture
Other constituents, including non-classified components, may be listed by the suppliers of the substance. This section may also provide information on substances with more than one component. See Trade Secrets for more information. |
|
Section 4: First-Aid Measures
|
Section 4: First-Aid Measures
|
|
Section 5: Fire-Fighting Measures
|
Section 5: Fire-Fighting Measures
|
|
Section 6: Accidental Release Measures
|
Section 6: Accidental Release Measures
|
|
Section 7: Handling and Storage
|
Section 7: Handling and Storage
|
|
Section 8: Exposure Controls/Personal Protection
|
Section 8: Exposure Controls/Personal Protection
Valid Turkish occupational limit values and necessary risk management measurements should be stated, as well as carcinogenic and mutagenic substances limit values according to the Directive of Carcinogenic and Mutagenic substances at workplaces or biologic limit values. See Occupational Exposure Limits for more information. |
|
Section 9: Physical and Chemical Properties
|
Section 9: Physical and Chemical Properties
|
|
Section 10: Stability and Reactivity
|
Section 10: Stability and Reactivity
|
|
Section 11: Toxicological Information Concise but complete and comprehensible description of the various toxicological effects and available data used to identify those effects including:
|
Section 11: Toxicological Information A summarized but complete and explicit description of the different toxicological (health) effects, which can emerge if the user comes into contact with the substance or preparation. The data in this section shall be in harmony with the data given in a registration and/or in a Chemical Safety Report and consistent with the classification of substances and mixtures and shall give information on the potential effects of following hazardous classes:
Specific target organ toxicity single exposure
For substances requiring registration, summaries of the information, acquired from applying Annexes VII to XI of KKDIK Regulation shall be given. The information shall also include the result of the comparison of the available data with the criteria given in Regulation of Classification, Labeling and Packaging, for CMR, categories 1A and 1B, following paragraph 1.3.1 of Annex I of the KKDIK Regulation. 11.1.1 Information shall be provided for each hazard class or differentiation. If it is stated that the substance or mixture is not classified for a particular hazard class or differentiation, the safety data sheet shall clearly state whether this is due to lack of data, technical impossibility to obtain the data, inconclusive data or data which are conclusive although insufficient for classification; in the latter case the safety data sheet shall specify “based on available data, the classification criteria are not met”. |
|
Section 12: Ecological Information
|
Section 12: Ecological Information
|
|
Section 13: Disposal Considerations Description of waste residues and information on their safe handling and methods of disposal, including the disposal of any contaminated packaging |
Section 13: Disposal Considerations Waste handling methods |
|
Section 14: Transport Information
|
Section 14: Transport Information
|
|
Section 15: Regulatory Information Safety, health and environmental regulations specific for the product in question |
Section 15: Regulatory Information Information on other regulations, pertaining to the substances or mixtures for which the SDS is currently compiled for, is given. (if subject to e.g., the Regulation on the reducing ozone depleting substances or Regulation on Import and export of hazardous chemicals). Information on the related health, safety and environment provisions (e.g. Regulation of prevention of major industrial accidents and reducing the effects) and/or regulatory information, based on the condition of substances or mixtures, and hence provide necessary recommendations for the actions taken by the buyers, according to the provisions. Also, any available restrictions or authorization, on substances or mixtures covered under the SDS, which affects, human's health and environment should be specified in this section. Any existing evaluation on the chemical substance or mixture, should be declared by the supplier. |
|
Section 16: Other Information Other information including information on preparation and revision of SDS |
Section 16: Other Information Other information which hasn't been included in sections 1-15 including revision information of the SDS, should be provided;
Safety Data Sheets must be prepared by experts who are certified through the Turk Accreditation Institute. In this section, contact information and the certification number of the certified SDS author must appear. For the certified person preparing the SDS, the following information should be added to the 16th Section; Authoring Person of the Safety Data Sheet: Contact information: Certificate date, Certificate number |