⇐ Return to main United States page
¶ GHS Revision 8 |
¶ Implemented by United States of America in 29CFR1910.1200 Table D.1 |
|
Section 1: Identification of the Substance or Mixture and of the Supplier
|
Section 1. Identification a) Product identifier used on the label; b) Other means of identification; c) Recommended use of the chemical and restrictions on use; d) Name, U.S. address, and U.S. telephone number of the chemical manufacturer, importer, or other responsible party; e) Emergency telephone number. OSHA has stated that a US address and phone number are required on SDSs and labels of hazardous chemicals. See Letters of Interpretation for additional information. |
|
Section 2: Hazards Identification
|
Section 2. Hazard(s) Identification a) Classification of the chemical in accordance with paragraph (d) of 1910.1200; b) Signal word, hazard statement(s), symbol(s) and precautionary statement(s) in accordance with paragraph (f) of 1910.1200. (Hazard symbols may be provided as graphical reproductions in black and white or the name of the symbol, e.g., flame, skull and crossbones); c) Hazards classified under paragraph (d)(1)(ii) of 1910.1200; d) Describe any hazards not otherwise classified that have been identified during classification process; e) Where an ingredient with unknown acute toxicity is used in a mixture at a concentration >= 1% and the mixture is not classified based on testing of the mixture as a whole, a statement that X% of the mixture consists of ingredient(s) of unknown acute toxicity is required. |
|
Section 3: Composition/Information on Ingredients Substance
Mixture
NOTE: For information on ingredients, the competent authority rules for CBI take priority over the rules for product identification. |
Section 3. Composition/Information on Ingredients Substances: a) Chemical name; b) Common name and synonyms; c) CAS number and other unique identifiers; d) Impurities and stabilizing additives which are themselves classified and which contribute to the classification of the substance. Mixture: In addition to the information required for substances: a) The chemical name and concentration (exact percentage) or concentration ranges all ingredients which are classified as health hazards in accordance with paragraph (d) of 1910.1200 and (1) are present above their cut-off/concentration limits; or (2) present at health risk below the cut-off/concentration limits. b) The concentration (exact percentage) shall be specified unless a trade secret claim is made in accordance with paragraph ( i ) of 1910.1200, when batch-to-batch variability in the production of a mixture, or for a group substantially similar mixtures (See A.0.5.1.2) with similar chemical composition. In these cases, concentration ranges may be used. |
|
Section 4: First-Aid Measures
|
Section 4. First-Aid Measures GHS fully implemented. |
|
Section 5: Fire-Fighting Measures
|
Section 5. Fire-Fighting Measures GHS fully implemented. |
|
Section 6: Accidental Release Measures
|
Section 6: Accidental Release Measures a) Personal precautions, protective equipment, and emergency procedures. b) Method sand materials for containments and cleaning up. |
|
Section 7: Handling and Storage
|
Section7: Handling and Storage GHS fully implemented. |
|
Section 8: Exposure Controls/Personal Protection
|
Section 8: Exposure Controls/Personal Protection a) For all ingredients or constituents listed in Section 3, the OSHA permissible exposure limit (PEL), American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV), and any other exposure limit used or recommended by the chemical manufacturer, importer, or employer preparing the safety data sheet, where available. b) Appropriate engineering controls. c) Individual protection measures, such as personal protective equipment. See Occupational Exposure Limits for more information. |
|
Section 9: Physical and Chemical Properties
|
Section 9: Physical and Chemical Properties a) Physical state. b) Color. c) Odor (includes odor threshold) d) Melting point/freezing point. e) Boiling point (or initial boiling point or boiling range) f) Flammability g) Lower and upper explosion limit/flammability limit h) Flash point i) Auto-ignition temperature. j) Decomposition temperature k) pH l) Kinematic viscosity m) Solubility n) Partition coefficient n-octanol/water (log value) o) Vapor pressure (includes evaporation rate) p) Density and/or relative density q) Relative vapor density r) Particle characteristics |
|
Section 10: Stability and Reactivity
|
Section 10: Stability and Reactivity GHS fully implemented. |
|
Section 11: Toxicological Information Concise but complete and comprehensible description of the various toxicological effects and available data used to identify those effects including:
|
Section 11: Toxicological Information Description of the various toxicological (health) effects and the available data used to identify those effects, including: a) Information on the likely routes of exposure (inhalation, ingestion, skin and eye contact); b) Symptoms related to the physical, chemical and toxicological characteristics; c) Delayed and immediate effects and also chronic effects from short- and long-term exposure; d) Numerical measures of toxicity (such as acute toxicity estimates). e) Interactive effects; information on interactions should be included if relevant and readily available; f) Whether the hazardous chemical is listed in the National Toxicology Program (NTP) Report on Carcinogens (latest edition) or has been found to be potential carcinogen in the International Agency for Research on Cancer (IARC) Monographs (latest edition), or by OSHA. g) When specific chemical data or information is not av available, the preparer must indicate if alternative information is used and the method used to derive the information (e.g., where the preparer is using information from a class of chemicals rather than the exact chemical in question and using SAR to derive the toxicological information). |
|
Section 12: Ecological Information
|
Section 12: Ecological Information Non-Mandatory Section Content of this section is not mandatory. The header must be included in the SDS. a) Ecotoxicity (aquatic and terrestrial, where available); b) Persistence and degradability; c) Bioaccumulative potential; d) Mobility in soil; e) Other adverse effects (such as hazardous to the ozone layer). |
|
Section 13: Disposal Considerations Description of waste residues and information on their safe handling and methods of disposal, including the disposal of any contaminated packaging |
Section 13: Disposal Considerations Non-Mandatory Section Content of this section is not mandatory. The header must be included in the SDS. Description of waste residues and information on their safe handling and methods of disposal, including the disposal of any contaminated packaging. |
|
Section 14: Transport Information
|
Section 14: Transport Information Non-Mandatory Section Content of this section is not mandatory. The header must be included in the SDS. a) UN number; b) UN proper shipping name; c) Transport hazard class(es) d) Packaging group, if applicable; e) Environmental hazards (e.g., Marine pollutant (Yes/No)); f) Transport in bulk (according to IMO instruments); g) Special precautions which a user needs to be aware of, or needs to comply with, in connection with transport or conveyance either within or outside their premises. |
|
Section 15: Regulatory Information Safety, health and environmental regulations specific for the product in question |
Section 15: Regulatory Information Non-Mandatory Section Content of this section is not mandatory. The header must be included in the SDS. Safety, health and environmental regulations specific for the product in question. See SARA classification for an example of regulatory information that may be included in Section 15. |
|
Section 16: Other Information Other information including information on preparation and revision of SDS |
Section 16: Other Information, including date of preparation or last revision The date of preparation of the SDS or the last change to it. Though not a requirement, see NFPA and HMIS ratings for additional information that is commonly included in Section 16. |