|
|
Note: These mandatory requirements can be changed in order within each section and presented in different forms.
|
|
Section 1: Identification of the Substance or Mixture and of the Supplier
- GHS product identifier
- Other means of identification
- Recommended use of the chemical and restrictions on use
- Supplier’s details (including name, address, phone number etc.)
- Emergency phone number
|
Section 1: Identification on Product and Supplier
- Product identifier according to GHS or any other identifications of the chemical/product (Including CAS number, UN number (if any), EC number (if any), commercial name)
- Recommended use and restrictions on use (brief description)
- Contact of the supplier (importer; manufacturer; distributor): name, address, phone number, etc.
- Emergency contact: phone number
|
|
Section 2: Hazards Identification
- GHS classification of the substance/mixture and any national or regional information
- GHS label elements including precautionary statements. (Hazard symbols may be provided as a graphical reproduction of the symbols in black and white or the name of the symbol e.g. "flame")
- Other hazards which do not result in classification (e.g. "dust explosion hazard") or are not covered by the GHS
|
Section 2: Hazard Identification
- GHS classification of the substance/mixture and any national or regional information (EU, USA, OSHA, etc.)
- GHS label elements: hazard warning, precautionary statements on preservation and usage, etc.
- Other information of hazards (if any)
|
|
Section 3: Composition/Information on Ingredients
Substance
- Chemical identity
- Common name, synonyms, etc.
- CAS number and other unique identifiers
- Impurities and stabilizing additives which are themselves classified and which contribute to the classification of the substance
Mixture
- Chemical identity
- Concentration or concentration ranges of all ingredients which are hazardous within the meaning of the GHS and are present above their cut-off levels
NOTE: For information on ingredients, the competent authority rules for CBI take priority over the rules for product identification.
|
Section 3: Composition/Information on Ingredients
One or more of the following information should be displayed:
- Single substance:
- Chemical identification: common name
- Other chemical identification: CAS number, UN number (if any), EC number (if any)
- Commercial name
- Impurities and stabilizers that affect the classification of chemicals
- Mixtures:
- Chemical identification
- Concentration or Concentration ranges of all ingredients which are hazardous and present above their cut-off values
Legal regulations on Trade Secrets information will be prioritized when listing component.
|
|
Section 4: First-Aid Measures
- Description of necessary measures subdivided according to the different routes of exposure, i.e. inhalation, skin and eye contact and ingestion
- Most important symptoms/effects, acute and delayed
- Indication of immediate medical attention and special treatment needed if necessary
|
Section 4: First-aid Measures
- Description of necessary measures subdivided according to the different routes of exposure, i.e. inhalation, skin and eye contact and ingestion
- Acute and chronically severe symptoms/effects
- Indication of immediate medical attention and special treatment, if necessary
|
|
Section 5: Fire-Fighting Measures
- Suitable and unsuitable extinguishing media
- Specific hazards arising from the chemical (e.g. nature of any hazardous combustion products)
- Special protective equipment and precautions for fire fighters
|
Section 5: Fire-fighting Measures
- Appropriate fire-fighting equipment
- Any toxins produced when burned (toxic gas, etc.)
- Special protective equipment and precautions for fire fighters
|
|
Section 6: Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Environmental precautions
- Methods and materials for containment and cleaning up
|
Section 6: Accidental Release Measures
- Protective equipment and procedures for incident response
- Environmental warnings
- Cleaning measures and materials after the incident
|
|
Section 7: Handling and Storage
- Precautions for safe handling
- Conditions for safe storage including any incompatibilities
|
Section 7: Handling and Storage
- Measures, conditions needed to be applied when using, manipulating hazardous chemicals (E.g., ventilation, use in a closed system only, using electric devices to prevent explosion, internal transport, etc.)
- Measures, conditions needed to be applied during storage (temperature, arrangement, restrictions on the source of fire, explosion, and substances need to be avoided in normal storage, etc.)
|
|
Section 8: Exposure Controls/Personal Protection
- Control parameters e.g. occupational exposure limits or biological limit values
- Appropriate engineering controls
- Individual protection measures, such as personal protective equipment
|
Section 8: Exposure Controls/Personal Protection
Control parameters (occupational exposure limits, biological indicator limits)
Appropriate control measures
Personal protective equipment and measures
See Occupational Exposure Limits for more information.
|
|
Section 9: Physical and Chemical Properties
- Physical state
- Colour
- Odour
- Melting point/freezing point
- Boiling point or Initial boiling point and boiling range
- Flammability
- Lower and upper explosion limits/flammability limit
- Flash point
- Auto-ignition temperature
- Decomposition temperature
- pH
- Kinematic viscosity
- Solubility(ies)
- Partition coefficient: n-Octanol/Water
- Vapour pressure
- Density and/or relative density
- Relative vapour density
- Particle characteristics
|
Section 9: Physical and Chemical Properties
- Physical state
- Boiling point (°C)
- Color
- Melting point (°C)
- Odor
- Flash point (°C) (according to determination methods)
- Vapor pressure (mm Hg) at standard temperature and pressure
- Auto-ignition temperature (°C)
- Gas proportion (air = 1) at standard temperature and pressure
- Lower and upper explosion limit/flammability limit (% of mixture with air)
- Solubility(ies)
- pH
- Vapor percentage
- Density and/or relative density (kg/m3)
- Other properties, if any
|
|
Section 10: Stability and Reactivity
- Reactivity
- Chemical stability
- Possibility of hazardous reactions
- Conditions to avoid
- Incompatible materials
- Hazardous decomposition products
|
Section 10: Stability and Reactivity
- Reactivity
- Stability
- Possibility of hazardous reactions (corrosion, combustion, etc.)
- Conditions to avoid (static electricity, vibration, shaking, etc.)
- Incompatible materials
- Decomposition reaction(s) and toxic products of decomposition reaction(s).
|
|
Section 11: Toxicological Information
Concise but complete and comprehensible description of the various toxicological effects and available data used to identify those effects including:
- Information on the likely routes of exposure (inhalations, ingestion, skin and eye contact)
- Symptoms related to the physical, chemical and toxicological characteristics
- Delayed and immediate effects and also Chronic effects from short and long-term exposure
- Numerical measures of toxicity (such as acute toxicity estimates)
|
Section 11: Toxicological Information
Accurate and full description of the various toxicological effects and available data used to identify those effects including:
- Information on the likely different routes of exposure (inhalation, ingestion, skin and eye contact)
- Symptoms related to chemical toxicity and ecotoxicity
- Immediate effects, delayed effects and chronic effects from short-term and long-term exposure
- List of toxicological parameters (estimated acute toxicity)
|
|
Section 12: Ecological Information
- Ecotoxicity (aquatic and terrestrial, where available)
- Persistence and degradability
- Bioaccumulative potential
- Mobility in soil
- Other adverse effects
|
Section 12: Ecological Information
- Environmental toxicity (aquatic and terrestrial)
- Persistence, degradability and decomposition
- Bioaccumulative potential
- Flexibility in soil
- Other hazards
|
|
Section 13: Disposal Considerations
Description of waste residues and information on their safe handling and methods of disposal, including the disposal of any contaminated packaging
|
Section 13: Disposal Considerations
Description of waste residues and information on their safe handling and methods of disposal, including the disposal of any contaminated packaging
|
|
Section 14: Transport Information
- UN number
- UN proper shipping name
- Transport hazard class(es)
- Packing group if applicable
- Environmental hazards (e.g. marine pollutant (Yes/No))
- Transport in bulk
- Special precautions which a user needs to be aware of, or needs to comply with, in connection with transport or conveyance either within or outside their premises
|
Section 14: Transport Information
One or more of the following related information must be displayed:
- UN number
- UN proper shipping name
- Transport hazard class(es)
- Packing group (if any)
- Environmental hazards (marine pollutants)
- Transportation in bulk
- Special warnings for users during shipping
|
|
Section 15: Regulatory Information
Safety, health and environmental regulations specific for the product in question
|
Section 15: Regulatory Information
Legal information on safety, health and environment specific for the product.
|
|
Section 16: Other Information
Other information including information on preparation and revision of SDS
|
Section 16: Other Information
Other necessary information, including information on preparation and revision of SDS
|