¶ Background |
|
|
The Kingdom of Denmark comprises Denmark and two other autonomous constituent countries, the Faroe Islands and Greenland. The legislative body in Denmark is the Parliament which represents the multi-party structure of Denmark. Power is divided into three sections: the aforementioned Parliament; the government which is the executive body and who is in charge of ensuring that the laws are observed; the Courts of Justice which has judicial power to rule in case of conflicts between authorities and citizens. The Danish Government is represented by the Ministries and the Prime Minister's Office, Moreover, the Kingdom of Denmark has been a Member State of the European Union since 1973. Therefore many of the regulations and the laws in Denmark are common with or pursuant to those of the EU. The chemical legislation rules in Denmark are based on the Chemicals and Products Act. The objective of the Act is to prevent hazards to human health and damage to the environment in connection with the manufacture, storage, use and disposal of chemical substances and products. The Act also ensures that the necessary information is provided of chemical substances and products which are sold in Denmark, and that the sale and the use of the chemical substances and products suspected to be hazardous to human health is strictly regulated. The Danish Environmental Protection Agency (the Danish EPA) is under the authority of the Danish Ministry of Environment and Food. It is the crucial body in terms of chemical regulation responsibility. Within the Danish EPA, there is the Chemical Inspection Service which supervises compliance of importers, producers and distributors. The Ministry of Employment regulates the chemical substances in the working environment. The Danish Legislation is published on the Official Governmental Danish Gazette (in Danish). |
CLP, REACH and BPR Helpdesk
|
¶ Inventories |
|
|
See European Union pages: |
|
¶ Substance Registration |
|
¶ REACHSee European Union page: REACH |
|
¶ Product Registration |
|
¶ Danish Biocidal Products LegislationBiocidal products in Denmark are authorized according to the EU Biocidal Products Regulation (BPR). The regulation is supplemented by national legislation, the Statutory Order on Pesticides. ¶ ApplicationThe Danish Environmental Protection Agency (EPA) is the competent authority responsible for handling the applications and authorizing biocidal products in Denmark. Depending on the type of application, there are different procedures and forms. More information is provided on the Danish EPA website under Authorization procedure. The Danish Statutory Order on the Use of Chemical Substances and Mixtures in Pesticides contains lists of active substances for which the European Commission has either granted or rejected the status of active substances for biocides and plant protection products. Even if a product does not yet require authorization in Denmark, it still must be registered at the Danish Product Registry in the Danish Working Environment Authority (WEA). When the Danish EPA authorizes the product, it also automatically registers it to the Product Registry. ¶ National Transitional MeasuresIn Denmark, products authorized under the old Danish scheme (applicable before the entry of force of the Biocidal Products Directive in 2000) must still be authorized under these rules during the transitional period when the EU is evaluating the active substances in the products. But only those products whose active substance is under evaluation in the relevant Product Type under the BPR may be authorized. This scheme will continue to apply to individual products until a decision has been made in the EU about inclusion or non-inclusion of the active substance. After approval, the products must be authorized under the EU Biocidal Products Regulation. According to §§14-17 of the Statutory Order on Pesticides, products against the following pests are covered with the transitional authorization:
¶ Anti-fouling PaintIn Denmark there are rules which cover the use of anti-fouling paints on ships, mainly pleasure craft. More information can be found on the Danish EPA site and in the Statutory Order on Anti-fouling Paint (in Danish). ¶ Biocidal products for food industry and agricultureThe biocidal products used in the food industry and agriculture, e.g. disinfectants, must be approved by the Danish Veterinary and Food Administration. The application form is available also in English. |
Sources
Resources
*Not available in English Navigate to: EU Biocidal Products |
¶ Danish Plant Protection Product LegislationThe plant protection products (PPPs) in Denmark are authorized according to the EU Pesticide Regulation, (EC) No 1107/2009. Since the regulation is directly-acting, it shall not be implemented in Danish law but it is supplemented by national legislation on pesticides and chemicals - the Statutory Order on Pesticides and the Danish Chemicals Act. The Danish EPA authorizes the PPPs before they can be imported, sold, or used in Denmark. The active substance has to be approved at the EU level before products can be authorized in Denmark. The authorization application to place a product on the market in Denmark is free of charge. The webpage of the Danish EPA contains detailed information on the application processes for the zonal authorization (Denmark is in the North zone), new products, renewals, mutual recognition, parallel trade permits, etc. When the product is authorized, the annual fee and tax need to be paid. The fee is DKK 500 per year per authorization. In addition, the purchase of plant protection products is subject to a tax in Denmark. The tax is based on the properties related to the environment and human health, so that the pesticides resulting in the highest load are subject to the highest taxes, while pesticides resulting in lower loads are subject to relatively lower taxes. More information on the fees and taxes can be found on the Danish EPA webpage. Producers, distributors, importers and exporters must keep records of the products they import, sell, etc as required by the Article 67 of Regulation (EC) No 1107/2009, for at least five years. The guideline on record keeping and on the type of information to be recorded is available on the website of Danish EPA. The information requirements depend on the role of the company i.e. producer, importer, exporter, distributor or supplier. The authorities may request access to the records. This may take the form of a control visit or a written request. Annually, a report on the sales of PPPs needs to be sent to the Danish EPA. The sales are reported by filling out the form received from the Danish EPA. The Danish Statutory Order on the Use of Chemical Substances and Mixtures in Pesticides and Biocides contains lists of active substances which the European Commission has assessed and decided either to include or not as active substances for biocides and plant protection products. |
Sources
Resources *Not available in English Navigate to: EU Plant Protection Products |
¶ CosmeticsSee European Union page: Cosmetics ¶ Enforcement in DenmarkThe EU Cosmetics Regulation is directly binding in Denmark and is enforced in the Statutory Order on Cosmetic Products (BEK 803, June 21, 2013). The Order stipulates the following:
Denmark has supplementary rules in two areas:
|
Sources
Resources *Not available in English |
¶ Notifications |
|
¶ C&L NotificationSee European Union page: C&L Notification |
|
¶ Poison CentreSee European Union page: Poison Centres |
|
¶ NanomaterialsProducts marketed to private consumers in Denmark containing nanomaterials that are not covered by other legislation must be registered in the Danish nanoproduct register, according to the Statutory Order no. 644. The Danish definition of nanomaterial follows the Commission Recommendation 2011/696/EU on the definition of nanomaterial. The registration is done through the reporting site of Virk.dk. The information is filled in the Inventory of Nanoproducts (in Danish: Nanoproduktregister). The mandatory information on nanomaterials to be submitted includes the following:
In addition to information on the nanomaterial, information on the company and on the product has to be submitted. Reporting shall be done annually, covering the period from 20 June the previous year to 20 June of the year being reported. The reporting must be done by 30 August of each year at the latest. If a foreign manufacturer or supplier does not want to pass all of the information to the Danish company, the foreign company can report all of the information directly to the Danish EPA. In this situation the Danish company needs to make arrangements with the Danish EPA and the foreign company must then approach the Danish EPA to report the information. Exemptions The following product groups are exempt from the reporting requirements according to §3 of the Statutory Order:
More details on the product groups can be found on the Guidance document. |
Sources Resources *Not available in English |
¶ Product Register¶ NotificationThe Danish Working Environment Authority (WEA) and the Danish Environmental Protection Agency maintain the Danish Product Register, which contains the information on products (pure substances or mixtures) placed on the market in Denmark. Companies placing the products on the market are required to notify the Register, administered by WEA. The notification is done by using the online system and it can be done also by a foreign company. In order to get access to the Product Registry, companies must contact pd@at.dk to get an user profile. Upon submission of the product notification, the company will receive a PR number for the product that must be reported in Section 15 on the safety data sheet. The PR number must also be stated on the product's packaging no later than one year after it has been assigned. ¶ Products to be NotifiedInformation must be submitted to the Product Register if a company produces, imports or changes trade names of a product of hazardous material in quantities equal to or exceeding 100 kg per year. If a pure substance is used for commercial purposes in quantities equal to 100 kg up to 1000 kg and not covered by the notification to REACH, it also needs to be notified to Product Register. This applies to any substance or mixture that meets any of the following criteria in Denmark:
Biocides always need to be registered in the Product Registry. ¶ Standard Notification and Raw Material NotificationThere are two types of notification, standard and raw material. In the raw material notification a manufacturer notifies a product as raw material, avoiding the need to disclose the composition to the importer/customer. The Danish Product Register assigns the raw material PR number to the product. This PR number is used in the subsequent notification to identify the product. Composition information in a notification may comprise several raw materials and these raw materials may also consist of other raw materials. The standard notification contains the same information as the raw material notification and, in addition, the identity of the Danish customer. If the standard notification is made by a non-Danish company, the identity of the Danish importer must be included in the notification. In this case the WEA will ask a Danish company to confirm the import and after the confirmation assigns a product its own PR number. ¶ Information RequirementsThe chemical composition of the product must be disclosed up to 100%. Each component need to be identified with a CAS number or a Danish Product Register number (PR number). If a component makes less than 1% of the total composition it is possible to use a generic PR number such as perfume, filler, or pigment but a maximum of 2% of the composition can be notified with generic PR numbers. It must be stated also in the notification if the product contains a technical manufactured nanosubstance and, if possible, indicate which substance is nanosize in the composition. The notification includes also the label information of the product. Notification requirements do not include substances or mixtures manufactured or imported for research purposes in a volume of <1000 kg, as long as the use of those substances/mixtures is limited to few persons. There are also other groups of substances that do not require the notification, which are usually covered by other legislation. More information regarding these groups can be found on the Product Register website. ¶ Biannual declaration on quantityEvery second year, the Danish importer or the manufacturer has to submit information on the volumes of the imported/manufactured substances/mixtures during the two years before (standard notification). ¶ FeesThere is no fee to pay for submission to the Danish Product Register. |
Sources
Resources *Not available in English
|
¶ Restrictions and Bans |
|
¶ Restrictions under REACHSee European Union page: Restrictions under REACH |
|
¶ Authorisation under REACHSee European Union page: Authorisation under REACH |
|
¶ Restriction of Hazardous Substances (RoHS)See European Union page: Restriction of Hazardous Substances (RoHS) ¶ RoHS in DenmarkDirective 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment has been implemented in the Danish legislation. The Danish EPA is the competent authority ensuring compliance with the RoHS regulation in Denmark. |
Sources *Not available in English |
¶ Persistent Organic Pollutants (POPs)See European Union page: Persistent Organic Pollutants (POPs) ¶ POPs in DenmarkProhibiting and restricting the manufacture, placing on the market and use of persistent organic pollutants is covered by Regulation (EC) No. 850/2004. This regulation and its amendments are valid in Denmark, regulated by the Danish EPA, and have been transposed to the following pieces of Danish legislation:
|
Sources *Not available in English |
¶ Ozone Depleting Substances (ODSs)See European Union page: Ozone Depleting Substances ¶ ODSs in DenmarkRegulation (EC) No 1005/2009 on the prohibition of the use of ozone depleting substances has been implemented in the Danish legislation. The Danish EPA is the competent authority ensuring compliance with the regulation in Denmark. |
Sources
*Not available in English |
¶ Restrictions in Denmark¶ Endocrine Disrupting CompoundsThe Danish strategy on endocrine disruptors focuses on the following areas:
On the request of the Danish EPA, the Danish Centre on Endocrine Disruptors (Cehos) evaluated 26 compounds based on the results from both human health in vitro/vivo studies and studies in the environment according to the Danish proposal for criteria for endocrine disruptors. The results were published in 2012. In 2019 Cehos published a report on the risk assessment of endocrine disrupting substances. Denmark is one of the EU countries whose national authorities have compiled lists of identified, under evaluation, or suspected endocrine disrupting substances. The lists on the website are updated twice per year.
|
Sources
*Not available in English |
¶ Industrial Greenhouse GasesIn Denmark, any commercial use, export and distribution of industrial greenhouse gases (HFC, PFC and SF6) is prohibited, with a few exemptions. The Danish Statutory Order on Industrial Greenhouse Gases details the criteria for exemption from these regulations:
The statutory order contains more guidance concerning greenhouse gases. |
Sources *Not available in English |
¶ MercuryWith a few exemptions, it is prohibited to sell, import, or export mercury and products containing mercury (>0.01% by weight) in Denmark. Further details including exemptions can be found in Environmental Statutory Order No 73. |
Sources *Not available in English |
¶ ParabensIn the Statutory Order No. 166, issued on February 24, 2011, that amended the Statutory Order on the Cosmetic products (Statutory Order No. 422 on May 4, 2006) Denmark introduced a national ban on Parabens in cosmetic products intended for children under 3 years. The ban on parabens is due to the 'Safety clause' in the European Cosmetics Directive (Article 12 of Directive 76/768/EEC). The Statutory Order on the Cosmetic products has since that been replaced with the EU Cosmetics Regulation. In 2013, a specific Statutory Order was issued on the ban on certain parabens (propylparaben, butylparaben, isopropylparaben, isobutylparaben and salts thereof) in cosmetic products for children under 3 years (Statutory order No. 1217). |
Sources *Not available in English |
¶ Undesirable SubstancesThe Danish Environmental Protection Agency maintains the List of Undesirable Substances (LOUS). It is an advisory list of chemicals for which use should be reduced or terminated. The product developers, manufactures, importers etc may use the list as guidance document and replace the substances of concern with alternatives. The list is available in Danish and English. It contains 40 substances and substance groups that have an undesirable impact on human health or environment and were used in amounts exceeding 100 tonnes/year in Denmark from 2007-2008. The tonnage threshold for substances that are subject to special focus in Denmark can be different Between 2012-2015, the Danish EPA carried out comprehensive surveys and collected information about each of the 40 substances and substance groups on LOUS (2009). The results of the survey are available in Danish on the EPA webpage. |
Sources *Not available in English |
¶ SDS + Label |
|
¶ ClassificationSee European Union page: Classification ¶ The Advisory List for Self-classification of Dangerous SubstancesThe Danish Environmental Protection Agency (Danish EPA) has published ''The advisory list for self-classification of chemical substances'' for more than 54 000 substances listed in EINECS without a harmonized classification. The (Q)SAR models ((quantitative) structure-activity relationships) have been used to predict hazardous effects of chemicals. The list includes the following endpoints:
Specifics of the (Q)SAR modelling used are available in the publication 'Report on the Advisory list for Self-classification of Dangerous Substances'. The Danish Environmental Agency recommends that:
|
Resources
*Not available in English |
¶ Safety Data SheetSee European Union page: Safety Data Sheet In Denmark, the required language is Danish. Sections of the Safety Data Sheet ¶ Danish MAL codesFor certain paint related products, the importer, manufacturer or distributor must determine a MAL code (the amount of ventilation needed for occupational hygiene). This code must be listed on the SDS. In Denmark, the MAL-code was introduced when considering the safety and working conditions of painters. Therefore, the following paint related products require, according to the Annex 1 of the Executive Order no. 302 on the Work with Code Numbered Products, a MAL code:
A higher MAL code indicates a more hazardous product. Methods of determining the MAL code are available on the Danish Working Environment Authority, WEA, website. The code number takes into account all the components of the product. MAL factors for approximately 330 substances are listed in the annex of the Executive Order No 301. If no MAL factor is available, it is possible to calculate it based on Limit Values and vapour pressure. The Executive Order No 301 has not been updated but WEA has assigned new MAL factors administratively and published them on the website of WEA in the document called "Administrativt fastsatte MAL-faktorer m.m." The latest issue was published on June 9, 2017. This document also contains Limit Values which are to be used in the calculations. Understanding a MAL code The code consists of two numbers joined with a hyphen:
|
Resources Executive Order No. 301 on the Determination of Code Numbers Danish I English
*Not available in English |
¶ LabelSee European Union page: Label ¶ Labels in DenmarkIn Denmark, Danish is required. The Product Register (PR) number must be stated on the product's packaging no later than one year after it has been assigned. The Danish Statutory Order No. 1565 covers the Classification, Packaging, Labelling, Sale and Storage of Substances in conformity with the CLP regulation. |
Sources *Not available in English |
¶ Trade SecretsSee European Union page: Trade Secrets |
|
¶ Occupational Exposure LimitsSee European Union page: Occupational Exposure Limits ¶ OELs in DenmarkOn May 17, 2011, the Danish Working Environment Authority adopted Statutory Order No. 507 on limit values for air pollution and biological exposure values. It is amended regularly. Appendix 2 of the Statutory Order contains the limit values for air pollutants given as limit values for an 8 hour workday, short term values and ceiling values. The substances are marked if they are carcinogenic or can easily be absorbed percutaneously. Appendix 2 of the Statutory Order contains the following Occupational Exposure Limit values and categories:
Appendix 3 contains the biological exposure limit value for lead. The WEA Instructions C.0.1 contains the limit values for organic solvents. In some cases only tentative values are available. The Statutory Order No. 822 of 16 June 2023 contains measures to prevent cancer risk in work when working with carcinogenic substances. |
Sources
*Not available in English |
¶ Transport |
|
| See European Union page: Transport | |