⇐ Return to main United Kingdom page
Since the UK’s exit from the European Union, Safety Data Sheets must comply with UK REACH, Annex II.
Under the European Union (Withdrawal) Act 2018, EU REACH Regulation was brought into UK law on January 1, 2021 and is known as UK REACH.
However, the Safety Data Sheet content requirements applicable in Great Britain have been retained as per Regulation EU/2015/830, applicable since June 1, 2015.
¶ EU SDS Requirements of REACH Annex II |
¶ Implementation in United Kingdom - GB Requirements |
|
Section 1: Identification of the substance/mixture and of the company 1.1 – Product identifier 1.2 – Relevant uses and uses advised against An e-mail address for a competent person responsible for the safety data sheet should be given in addition to the full address and telephone number of the supplier. |
Section 1: Identification of the substance/mixture and of the company Currently there is no official number in the UK. It is advised to provide your own company emergency number or a third party telephone number, providing emergency information 24 hours a day.
|
|
Section 2: Hazards Identification 2.1 – Classification of the substance or mixture |
Section 2: Hazards Identification EU requirements fully implemented (as per retained Regulation EU/2015/830). |
|
Section 3: Composition/information on ingredients The identifier, concentration or concentration ranges and the CLP classification of the substance or the substances in the mixture that are required to be listed. For substances in a mixture that are required to be disclosed, the registration number, EC number, CAS number and IUPAC number should all be given where available. |
Section 3: Composition/information on ingredients EU requirements fully implemented (as per retained Regulation EU/2015/830). See for Trade Secrets Alternative Chemical Names information. |
|
Section 4: First aid measures 4.1 – Description of first aid measures |
Section 4: First aid measures EU requirements fully implemented (as per retained Regulation EU/2015/830). |
|
Section 5: Firefighting measures 5.1 – Extinguishing media |
Section 5: Fire-Fighting Measures EU requirements fully implemented (as per retained Regulation EU/2015/830). |
|
Section 6: Accidental release measures 6.1 – Personal precautions, protective equipment and emergency procedures |
Section 6: Accidental Release Measures EU requirements fully implemented (as per retained Regulation EU/2015/830). |
|
Section 7: Handling and storage 7.1 – Precautions for safe handling |
Section 7: Handling and Storage EU requirements fully implemented (as per retained Regulation EU/2015/830). |
|
Section 8: Exposure controls/personal protection 8.1 – Control parameters Union values and national values for the country where SDS is being provided, regardless of their concentration, see REACH Annex II, Part A, section 8 for full details. If the SDS contains Exposure Scenarios, the applicable DNELs and PNECs for the substance should be listed. 8.2 – Exposure controls 8.2.1 Appropriate engineering controls |
Section 8: Exposure controls/personal protection EU requirements fully implemented (as per retained Regulation EU/2015/830). 8.1 – Control parameters |
|
Section 9: Physical and chemical properties 9.1 – Information on basic physical and chemical properties
9.2 – Other information |
Section 9: Physical and chemical properties EU requirements fully implemented (as per retained Regulation EU/2015/830). Below are the specific sections applicable in the UK that differ from the EU format: 9.1 – Information on basic physical and chemical properties
9.2 – Other information |
|
Section 10: Stability and reactivity 10.1 – Reactivity |
Section 10: Stability and reactivity EU requirements fully implemented (as per retained Regulation EU/2015/830). |
|
Section 11: Toxicological information 11.1 – Information on hazard classes as defined in Regulation (EC) No 1272/2008
11.2 – Information on other hazards |
Section 11: Toxicological information EU requirements fully implemented (as per retained Regulation EU/2015/830). Below are the specific sections that differ from current EU CLP Regulation: 11.1 The relevant hazard classes, for which information shall be provided, are: These hazards shall always be listed on the safety data sheet. 11.1.12 Other information |
|
Section 12: Ecological information 12.1 – Toxicity |
Section 12: Ecological information EU requirements fully implemented (as per retained Regulation EU/2015/830). Below are the specific sections that differ from current EU CLP Regulation: 12.1 – Toxicity |
|
Section 13: Disposal considerations 13.1 – Waste treatment methods (format not mandatory) 13.1.1 Product / Packaging disposal: |
Section 13: Disposal considerations EU requirements fully implemented (as per retained Regulation EU/2015/830). |
|
Section 14: Transport information 14.1 – UN Number |
Section 14: Transport information EU requirements fully implemented until 2015 as per retained Regulation EU/2015/830. |
|
Section 15: Regulatory information 15.1 – Safety, health and environmental regulations/legislation specific for the substance or mixture |
Section 15: Regulatory information EU requirements fully implemented until 2015 as per retained Regulation EU/2015/830. |
|
Section 16: Other information See Annex II, Part A, section 16 for details. |
Section 16: Other information EU requirements fully implemented until 2015 as per retained Regulation EU/2015/830. |
|
ANNEX: Exposure scenarios The format of the Exposure Scenario (ES) consists of 4 sections:
|
ANNEX: Exposure scenarios EU requirements fully implemented until 2015 as per retained Regulation EU/2015/830. |